S60.00-A044-06
2 | Heat shield |
8 | Rpm sensor electrical connector |
9 | Brakepad wear display electrical connector |
S60.00-A046-76
1 | Longitudinal member |
3 | Brake line |
4 | Brake hose |
5 | Rpm sensor electric line |
6 | Brakepad wear display electric line |
7 | Bracket |
10 | Bracket |
11 | Nut |
12 | Ground lines |
13 | Plug |
S60.00-A047-06
| Remove/install | ||
1 | Remove front-end assembly. | ||
2 | Remove front crash box. | ||
3 | Remove refrigerant condenser. |
| |
4 | Remove radiator unit. | ||
5 | Remove fender liner in fender. | ||
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
6 | Remove heat shield (2). | ||
7 | Remove brake line (3) from brake hose (4). | ||
8 | Unclip brake line (3) from longitudinal member (1) and place outside of working area. | ||
9 | Remove brackets for brake line (3) from longitudinal member (1). | ||
10 | Unclip rpm sensor electric line (5) from bracket (7). | ||
11 | Unclip brakepad wear display electric line (6) from bracket (7). | ||
12 | Disconnect rpm sensor electrical connector (8). | ||
13 | Disconnect brakepad wear display electrical connector (9). | ||
14 | Remove bracket (10) from longitudinal member (1). | ||
15 | Remove nut (11). | M8 | |
16 | Remove ground lines (12) from longitudinal member (1). | ||
17 | Remove stop plugs (13). | ||
18 | Install in the reverse order. |
Referenced documents
- ar2020s3871ea Remove/install radiator unit
- ar4210s0024e Remove/install brake hoses at front axle
- ar6000s0023e Remove/install front end
- ar6210s0001e Remove/install front crashbox
- ar8330s0013ea Remove/install refrigerant condenser
- ar8810s1300e Remove/install fender liner in front fender
- as0000z001701a Risk of injury caused by scraping or cutting body parts on sharp vehicle parts