Partially remove/install detachable parts for replacing left front longitudinal member

AR60.00-S-1008EA

Partially remove/install detachable parts for replacing left front longitudinal member

14.11.2019

Model

447 with engine 654.9

1

Longitudinal member

2

Insulation mat

3

Coolant hose

4

Bracket

5

Bracket

6

Brake line

7

Brake hose

8

Rpm sensor electrical connector

9

Rpm sensor electric line

10

Bracket

 

Remove/install

1

Remove front-end assembly.

AR60.00-S-0023E

2

Remove left front crash box.

AR62.10-S-0001E

3

Remove refrigerant condenser.

Model 447 with engine 654.9
with code HH4 (THERMOTRONIC automatic climate control)
Model 447 with engine 654.9
with code HH9 (Air conditioner, automatic heater control)

AR83.30-S-0013EA

4

Remove radiator unit.

AR20.20-S-3871EA

5

Remove fender liner in left fender.

AR88.10-S-1300E

6

Remove washer fluid reservoir of windshield washer system.

AR82.35-S-6000E

7

Remove insulation mat (2) from longitudinal member (1), fold upwards and fix in place.

8

Unclip coolant hose (3) from bracket (4).

9

Remove bracket (4) from longitudinal member (1).

10

Remove bracket (5) from longitudinal member (1).

11

Remove brake line (6) from brake hose (7).

AR42.10-S-0024E

12

Unclip brake line (6) from longitudinal member (1) and place outside the working area.

13

Remove brackets for brake line (6) from longitudinal member (1).

14

Unclip rpm sensor electric line (9) from bracket (10).

15

Disconnect rpm sensor electrical connector (8).

16

Remove bracket (10) from longitudinal member (1).

17

Place electric lines outside of working area.

 The number of electric lines depends on the equipment installed.

18

Install in the reverse order.