ar6000s080002e

Pound in vehicle identification number

Type ar · topic 60.00 · version 0201 · 2017-03-28

Applies to: Model 447, 448

Where it sits

Function group 3 Body › 60 Body - general › 60.00 General — Series 447 · Series 448

EinPAS 35 Body/frame/detachable parts › 35.20 Cab/body › 35.20.30 Cab — Series 447 · Series 448

EinPAS 35 Body/frame/detachable parts › 35.20 Cab/body › 35.20.40 Bodyshell — Series 447 · Series 448

AR60.00-S-0800-02E

Pound in vehicle identification number

Model

447, 448

Modification notes

11.10.2016

Method supplemented, special tools updated

Operation steps 1 to 3

Pound in vehicle identification number
Pound in vehicle identification number
Pound in vehicle identification number

000 589 00 39 00

Letter marking punch

000 589 01 39 00

Die stamp numbers

000 589 02 39 00

Star marking punch

Pound in vehicle identification number

Model 447
Use star stamp at start and end of vehicle identification number (VIN).
Model 448
Use five-pointed star stamp at start and end of VIN.
Commercially available devices/tools
Five-pointed star stamp (character height 6 mm)

S60.00-4567-11

1

Stamp in with star stamp or five-pointed star stamp at left end stop.

Ensure that tool is aligned correctly.
The tip of the star stamp or five-pointed star stamp should point upward in the typeface.

2

Position letter stamp of first letter of VIN at the first graduation line with the left edge and stamp in.

Model 447
VIN starts with "W".

Model 448
VIN starts with "L".

3

Stamp in remaining VIN.

With each following letter stamp or number stamp, move one graduation line forward on scale until the complete VIN and the star are stamped in either with the star stamp or with the five-pointed star stamp.
The entire width of the VIN is 106 mm (4 mm).