ar6000s0022pac

Partially remove/install detachable parts on entrance for replacing longitudinal member

Type ar · topic 60.00 · version 0200 · 2019-04-26

Applies to: Model 470, 471 Right rear area

Where it sits

Function group 3 Body › 60 Body - general › 60.00 General — Series 470 · Series 471

EinPAS 35 Body/frame/detachable parts › 35.20 Cab/body › 35.20.50 Entrance — Series 470 · Series 471

AR60.00-S-0022PAC

Partially remove/install detachable parts on entrance for replacing longitudinal member

15.04.2019

Model

470, 471

Right rear area

Modification notes

15.04.2019

Method extended

Operation steps 7, 9

Partially remove/install detachable parts on entrance for replacing longitudinal
	member

Shown on model 470 with code EC1 (eCALL Russia (ERA-GLONASS))

4

Bracket

5

Bolts

6

ISOFIX child seat attachment

7

Bolts

8

Seat belt retractor bracket

9

Cover

10

Bracket

S60.00-4902-06

Partially remove/install detachable parts on entrance for replacing longitudinal
	member

S63.30-4780-09

Possible cuts for repair variants, shown on left side of vehicle

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove edge guard for door cutout of front door.

For "variant 9" (cuts in areas C, D and G) or "variant 10" (cuts in areas B, D and G).

2

Remove edge guard for door cutout of rear door.

3

Remove seat belt from B-pillar.

For "variant 9" (cuts in areas C, D and G) or "variant 10" (cuts in areas B, D and G).

AR91.40-S-1015P

4

Remove lower C-pillar trim.

AR68.30-S-4494P

5

Remove rear door.

AR72.12-S-0600P

6

Remove lower hinge of rear door.

For "variant 9" (cuts in areas C, D and G) or "variant 10" (cuts in areas B, D and G).

AR72.12-S-2663P

7

Remove platform.


Model 470 with engine 200

AR60.30-S-0001P

Model 470, 471 with engine 642, 699

AR60.30-S-0001PA

8

Remove side running board.


Model 470, 471 with code T1A (left and right side running board)

AR88.30-S-2400P

9

Remove side bar with step.


Model 470, 471 with code Y1M (side bar with Tritt), model 470, 471 with code Y1N (side bar with Tritt)

AR88.30-S-0014P

10

Remove floor mats.

11

Remove front seat.

AR91.10-S-1000P

12

Remove emergency call system auxiliary battery.


Model 470 with code EC1 (eCALL Russia (ERA-GLONASS)), model 470 with code EY5 (Mercedes-Benz emergency call system)

AR82.95-S-0010P

13

Remove bracket (4).

Model 470 with code EC1 (eCALL Russia (ERA-GLONASS)), model 470 with code EY5 (Mercedes-Benz emergency call system)

To do this, remove the screw/bolts (5).

14

Remove ISOFIX child seat securing system (6).

To do this, remove bolts (7).

Screw, ISOFIX child seat securing system to vehicle floor

*BA91.40-N-1013-01P

15

Remove bracket for seat belt retractor (8) of seat belt in rear from rear panel and vehicle floor.

AR91.40-S-0682P

16

Remove cap (9).

17

Remove bracket (10).

Clip remover

*452589016300

18

Move floor covering out of working area.

19

Remove electrical subharnesses.

Installation: Refasten electrical subharnesses.

20

Route electrical subharnesses out of working area.

21

Install in the reverse order.

Seat belts/emergency tensioning retractors

Number

Designation

Model 471

Model 470

BA91.40-N-1013-01P

Screw, ISOFIX child seat securing system to vehicle floor

Nm

45

45

Partially remove/install detachable parts on entrance for replacing longitudinal
	member

452 589 01 63 00

Clip remover

Referenced documents