Partially remove/install detachable parts on entrance for replacing longitudinal member

AR60.00-S-0022PAA

Partially remove/install detachable parts on entrance for replacing longitudinal member

02.09.2019

Model

470, 471

Center range

Modification notes

15.04.2019

Method extended

Operation step 11

Shown on model 470 with engine 699 with code EC1 (eCALL Russia (ERA-GLONASS)), left side of vehicle

1

Screw

5

Bolts

8

Seat belt retractor bracket

2

Bracket

6

ISOFIX child seat attachment

9

Cover

3

Bolts

7

Bolts

10

Bracket

4

Bracket

Possible cuts for repair variants, shown on left side of vehicle

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove edge guard for door cutout of respective front door.

2

Remove edge guard for door cutout of respective rear door.

3

Remove respective seat belt from B-pillar.

AR91.40-S-1015P

4

Remove respective lower C-pillar trim.

AR68.30-S-4494P

5

Remove respective front door.

For "variant 3" (cuts in areas A, D and E) or "variant 4" (cuts in areas A, D and F).

AR72.10-S-0500P

6

Remove respective lower front door hinge.

For "variant 3" (cuts in areas A, D and E) or "variant 4" (cuts in areas A, D and F).

AR72.10-S-2662P

7

Remove respective rear door.

AR72.12-S-0600P

8

Remove respective lower rear door hinge.

AR72.12-S-2663P

9

Remove respective front fender.

For "variant 3" (cuts in areas A, D and E) or "variant 4" (cuts in areas A, D and F).

AR88.10-S-1005P

10

Remove respective running board at side.

Model 470, 471 with code T1A (left and right side running board)

AR88.30-S-2400P

11

Remove respective side bar with step.

Model 470, 471 with code Y1M (side bar with Tritt), model 470, 471 with code Y1N (side bar with Tritt)

AR88.30-S-0014P

12

Remove respective floor mats.

13

Remove respective front seat.

AR91.10-S-1000P

14

Disconnect electrical connector from exhaust aftertreatment system control unit.

If left side of vehicle is damaged.

Model 470 with engine 642, model 470 with engine 699 except code MT2 (emissions class Euro 6d-TEMP N1 GR.III/N2)

AR14.40-S-2077PD

15

Remove screw/bolt (1).

16

Remove holder (2).

Model 470, 471 with engine 642, 699
If left side of vehicle is damaged.

 To do this, remove screws/bolts (3).

17

Remove emergency call system auxiliary battery.

If right side of vehicle is damaged.

Model 470 with code EC1 (eCALL Russia (ERA-GLONASS)), model 470 with code EY5 (Mercedes-Benz emergency call system)

AR82.95-S-0010P

18

Remove bracket (4).

Model 470 with code EC1 (eCALL Russia (ERA-GLONASS)), model 470 with code EY5 (Mercedes-Benz emergency call system)
If right side of vehicle is damaged.

 To do this, remove the screw/bolts (5).

19

Remove respective ISOFIX child seat securing system (6).

 To do this, remove bolts (7).

 Screw, ISOFIX child seat securing system to vehicle floor

*BA91.40-N-1013-01P

20

Remove respective bracket for seat belt retractor (8) of seat belt in rear from rear panel and vehicle floor.

AR91.40-S-0682P

21

Remove cap (9).

22

Remove respective bracket (10).

 Clip remover

*452589016300

23

Move floor covering out of working area.

24

Remove electrical subharnesses.

 Installation: Refasten electrical subharnesses.

25

Route electrical subharnesses out of working area.

26

Install in the reverse order.

 Seat belts/emergency tensioning retractors

Number

Designation

Model 471

Model 470

BA91.40-N-1013-01P

Screw, ISOFIX child seat securing system to vehicle floor

Nm

45

45