Shown variant 1 on model 415.603 |
S60.00-4873-06
Shown variant 2 on model 415.603 |
S60.00-4874-06
Shown variant 7 on model 415.603 |
S60.00-4798-06
Shown variant 9 on model 415.603 |
S60.00-4799-06
S60.00-4875-09
Shown on model 415.603 |
1 | Air duct | 3 | Insulation | |
2 | Insulation | 4 | Insulation |
| Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Remove ground line from battery | ||
2 | Remove front door | With corresponding damage profile. | |
When replacing front door: | |||
| |||
Disassemble front door. | |||
Disassembling and assembling front door | |||
3 | Remove front door sealing frame | ||
4 | Remove front fender | Only for variant 2. | |
5 | Remove rear section of fender liner in front fender | Only for variant 2. | |
6 | Remove trim piece on side wall paneling | Only for variants 7 and 9. | |
7 | Remove fender liner in the rear fender | Only for variants 7 and 9. | |
8.1 | Rear rear side paneling in rear | Only for variants 7 and 9. | |
MODEL 415 with CODE V23 (Interior trim, superior version) | |||
8.2 | Remove side cargo area paneling on wheel well | Only for variants 7 and 9. | |
Model 415.603/605 with code VK1 (Interior trim) except code V23 (Interior trim, luxury version) | |||
9 | When removing left side load compartment paneling | Only for variants 7 and 9. | |
Model 415.603/605 with code VA2 (Interior trim in cargo area up to roof height (wood)) | |||
10 | Remove seat belt from B-pillar | Only for variants 7 and 9. | |
11 | Remove partition | Only for variants 7 and 9. | |
Model 415.603/605 with code D50 (Full-width partition wall) Model 415.603/605 with code D51 (Full-width partition wall with 1 window) | |||
12 | Remove floor covering |
| |
Model 415.605/703 with code U77 (Rear bench seat FOLD & LOAD 1/3 : 2/3 separable) | |||
13 | Remove air duct (1) | Only for variants 1, 2 and 7. | |
14 | Remove insulation (2) | Only for variants 1, 2 and 7. | |
15 | Remove insulation (3) | ||
16 | Lay insulation (4) down to side in repair area | Only for variant 2. | |
17 | Route electrical lines out of working area | ||
18 | Install in the reverse order |
Referenced documents
- ah6800n000101s Notes on carrying out repair work in the vehicle interior
- ar5410s0003c Disconnect/connect battery ground line
- ar6820s2040c Remove/install floor covering
- ar6820s2040ca Remove/install floor covering
- ar6830s1181c Remove/install side load compartment trim on wheel well
- ar6830s1185c Remove/install side load compartment paneling
- ar6830s1206c Remove/install rear side paneling
- ar6874s0651c Remove/install partition wall
- ar7210s0500c Remove/install front door
- ar7210s0510c Disassembling and assembling front door
- ar7210s2120c Remove/install door frame seal
- ar8810s1000c Remove/install front fenders
- ar8810s1320c Remove/install rear section of fender liner in front fender
- ar8810s1400c Remove/install fender liner in rear fender
- ar8885s9846c Remove/install trim piece on sidewall paneling
- ar9140s1015c Remove/install seat belt on B-pillar