Partially remove/install detachable parts on entrance for replacing longitudinal member

AR60.00-S-0022CA

Partially remove/install detachable parts on entrance for replacing longitudinal member

14.07.2015

Model

415.603/605/7

Right side of vehicle

Model

415.603/605/7

with code T19 (Sliding door left)

Left side of vehicle

Shown on variant 1 on model 415.703

Shown on variant 2 on model 415.703

Shown on variant 3 on model 415.703

Shown on variant 4 on model 415.703

Shown on variant 5 on model 415.703

Shown on variant 6 on model 415.703

Shown on variant 7 on model 415.703

Shown on variant 9 on model 415.703

Shown on model 415.703, left side of vehicle

1

Air duct

4

Insulation

7

Contact plate

2

Insulation

5

Floor covering

3

Insulation

6

Door stop



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove ground line from battery

AR54.10-S-0003C

2

Remove front door

Only for variants 1 to 7.

AR72.10-S-0500C

 At damaged side of vehicle.

When replacing front door



Disassembling and assembling front door

AR72.10-S-0510C

3

Remove front door sealing frame

Only for variants 1 to 7.

AR72.10-S-2120C

 At damaged side of vehicle.

4

Remove front fender

Only for variants 2 and 3.

AR88.10-S-1000C

 At damaged side of vehicle.

5

Remove rear section of fender liner in front fender

Only for variants 2 and 3.

AR88.10-S-1320C

 At damaged side of vehicle.

6

Remove sliding door

Only for variants 3, 4, 5, 6, 7 and 9.

AR72.16-S-1260C

 At damaged side of vehicle.

When replacing sliding door



Disassembling and assembling sliding door

AR72.16-S-2210C

7

Remove sealing frame on sliding door

Only for variants 3, 4, 5, 6, 7 and 9.

AR72.16-S-2120C

 At damaged side of vehicle.

8

Remove trim piece from side paneling

Only for variants 6, 7 and 9.

AR88.85-S-9846C

 At damaged side of vehicle.

9

Remove fender liner in the rear fender

Only for variants 6, 7 and 9.

AR88.10-S-1400C

 At damaged side of vehicle.

10.1

Rear rear side paneling in rear

Only for variants 6, 7 and 9.

MODEL 415 with CODE V23 (Interior trim, superior version)

AR68.30-S-1206C

 At damaged side of vehicle.

10.2

Remove side cargo area paneling on wheel well

Only for variants 6, 7 and 9.

Model 415 with code VK1 (Interior trim) except code V23 (Interior trim, luxury version)

AR68.30-S-1181C

 At damaged side of vehicle.

10.3

When removing left side load compartment paneling

Only for variants 6, 7 and 9.

Model 415 with CODE VA2 (Interior trim in cargo area up to roof height (wood))

AR68.30-S-1185C

 At damaged side of vehicle.

11

Remove lower guide rail for sliding door

Only for variants 3, 4, 5, 6, 7 and 9.

AR72.16-S-7816C

 At damaged side of vehicle.

12

Remove seat belt from B-pillar

Only for variants 3, 4, 5, 6 and 7.

AR91.40-S-1015C

 At damaged side of vehicle.

13

Remove partition

Only for variants 3, 4, 5, 6 and 7.

Model 415.603/605/7 with code D50 (Full-width partition wall) Model 415.603/605/7 with code D51 (Full-width partition wall with 1 window)

AR68.74-S-0651C

14.1

Remove floor covering

Only for variants 1 to 7.

Model 415.603/605 except code U77 (Rear bench seat, FOLD & LOAD 1/3 : 2/3 separable)

AR68.20-S-2040C

14.2

Remove floor covering

Only for variants 1 to 7.

Model 415.605 with code U77 (Rear bench seat, FOLD & LOAD 1/3 : 2/3 separable) Model 415.7 with code U77 (Rear bench seat FOLD & LOAD 1/3 : 2/3 separable)

AR68.20-S-2040CA

15

Remove air duct (1)

Only for variants 1 to 4 and 7.

 At damaged side of vehicle.

16

Remove insulation (2)

Only for variants 1 to 4 and 7.

 At damaged side of vehicle.

17

Remove insulation (3)

Only for variants 1 to 7.

 At damaged side of vehicle.

18

Lay insulation (4) down to side in repair area

Only for variants 2 and 3.

 At damaged side of vehicle.

19

Lay floor covering (5) down to side in repair area

Only for variants 3 to 7 and 9.

 At damaged side of vehicle.

20

Remove door hinge (6)

Only for variants 3 to 7.

 At damaged side of vehicle.

21

Remove contact plate (7)

Only for variants 3 to 7.

 At damaged side of vehicle.

22

Route electrical lines out of working area

23

Install in the reverse order