ar6000p080002e

Stamping in vehicle identification number

Type ar · topic 60.00 · version 0104 · 1998-01-28

Applies to: MODEL 202.0 /1, 208.3, 210.0 /2 /6

Where it sits

Function group 3 Body › 60 Body - general › 60.00 General — Series 202 (models 0**, 1**) · Series 208 (models 3**) · Series 210 (models 0**, 2**, 6**)

EinPAS 35 Body/frame/detachable parts › 35.20 Cab/body › 35.20.30 Cab — Series 202 (models 0**, 1**) · Series 208 (models 3**) · Series 210 (models 0**, 2**, 6**)

EinPAS 35 Body/frame/detachable parts › 35.20 Cab/body › 35.20.40 Bodyshell — Series 202 (models 0**, 1**) · Series 208 (models 3**) · Series 210 (models 0**, 2**, 6**)

AR60.00-P-0800-02E

Stamping in vehicle identification number

Stamping in vehicle identification number
Stamping in vehicle identification number
Stamping in vehicle identification number

Special tools

202 589 09 63 00

140 589 26 63 00

140 589 26 63 05

Number punch guide

Number punches

Number punches

Stamping in vehicle identification number

P60.00-0262-09

1 Start in outer front corner of window plate (4, arrow) with "Mercedes star" punch.

Note

The tip of the Mercedes star should point upward in relation
to the printing.

2 Then position the "W" punch with the edge aligned with the first mark in the window plate (4) and punch in (arrow).

3 Move forward one mark on the scale in the window plate (4) with each subsequent number punch until the entire vehicle identification number and final Mercedes star have been punched in.