Additional information can be found in the superordinate service document.
The safety information in the superordinate service document must be observed.
D60.00-1141-09
a | Dimension (300 mm) | f | Dimension (200 mm) | k | Dimension (450 mm) | ||
b | Dimension(100 mm) | g | Dimension (70 mm) | l | Dimension (90 mm) | ||
c | Dimension (450 mm) | h | Dimension (240 mm) | m | Dimension (500 mm) | ||
d | Dimension (150 mm) | i | Dimension (370 mm) | n | Dimension (150 mm) | ||
e | Dimension (80 mm) | j | Dimension (240 mm) |
Observe manufacturer's specification for processing of dampings (1, 2, 3, 4, 5, 6).
1 | Remove damaged dampings (1, 2, 3, 4, 5, 6) at front vehicle floor using suitable tool. |
2 | Clean front vehicle floor in area of bonding surfaces for dampings (1, 2, 3, 4, 5, 6) using cleaner. |
Bonding surfaces must be fully free from dust and grease. |
3 | Cut new dampings (1, 2, 3, 4, 5, 6) to size for respective dimensions (a, b, c, d, e, f, g, h, i, j, k, l, m, n). |
4 | Attach dampings (1, 2, 3, 4, 5, 6) to front vehicle floor as shown. |
Observe manufacturer's specification for processing of dampings (7, 8, 9).
5 | Remove damaged dampings (7, 8, 9) at vehicle floor using suitable tool. |
6 | Clean vehicle floor in area of bonding surfaces for dampings (7, 8, 9) using cleaner. |
Bonding surfaces must be fully free from dust and grease. |
7 | Cut new dampings (7, 8, 9) to size for respective dimensions (o, p, q, r, s, t, u, v, w, x, y, z, a1, b1, c1, d1, e1, f1, g1, h1, i1, j1, k1). |
8 | Attach dampings (7, 8, 9) to vehicle floor as shown. |
o | Dimension (170 mm) |
p | Dimension (230 mm) |
q | Dimension (85 mm) |
r | Dimension (225 mm) |
s | Dimension (70 mm) |
t | Dimension (35 mm) |
u | Dimension (30 mm) |
v | Dimension (65 mm) |
w | Dimension (70 mm) |
x | Dimension (40 mm) |
y | Dimension (40 mm) |
z | Dimension (200 mm) |
a1 | Dimension (75 mm) |
b1 | Dimension (75 mm) |
c1 | Dimension (380 mm) |
d1 | Dimension (140 mm) |
e1 | Dimension (160 mm) |
f1 | Dimension (400 mm) |
g1 | Dimension (200 mm) |
h1 | Dimension (190 mm) |
i1 | Dimension (450 mm) |
j1 | Dimension (220 mm) |
k1 | Dimension (160 mm) |
D60.00-1142-06