ar6000d175012ts

Replace damping on side roof paneling

Type ar · topic 60.00 · version 0100 · 2018-08-02

Applies to: Model 907, 910

Where it sits

Function group 3 Body › 60 Body - general › 60.00 General — Series 907 · Series 910

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.50 Dampening/shielding/insulation mat — Series 907 · Series 910

AR60.00-D-1750-12TS

Replace damping on side roof paneling

Model

907, 910

Repair materials

Number

Designation

Order number

BR00.45-Z-1025-04A

Cleaner

A 005 989 19 71

Additional information can be found in the superordinate service document.

The safety information in the superordinate service document must be observed.

Replace damping on side roof paneling

D60.00-1155-09

Shown on model 907.735 with code T16 (Sliding door, right), right side of vehicle

a

Dimension (250 mm)

b

Dimension(100 mm)

c

Dimension (150 mm)

Replace damping on side roof paneling

D60.00-1154-09

Shown on model 907.735 without code T19 (Sliding door, left), left side of vehicle

a

Dimension (250 mm)

b

Dimension(100 mm)

c

Dimension (150 mm)

Observe manufacturer's specification for processing of dampings (1, 2, 3, 4, 5, 6, 7, 8).

1.1

Model 907, 910
with code T16 (Sliding door right)
Right side of vehicleModel 907, 910
with code T19 (Sliding door left)Left side of vehicle
Remove damaged dampings (1, 2, 3, 4, 5) at respective roof paneling using suitable tool.

1.2

Model 907, 910
except code T16 (Sliding door right)
Right side of vehicleModel 907, 910
except code T19 (Sliding door left)Left side of vehicle
Remove damaged dampings (1, 2, 3, 4, 5, 6, 7, 8) at respective roof paneling using suitable tool.

2.1

Model 907, 910
with code T16 (Sliding door right)
Right side of vehicleModel 907, 910
with code T19 (Sliding door left)Left side of vehicle
Clean roof paneling in area of bonding surfaces for dampings (1, 2, 3, 4, 5) using cleaner.

Bonding surfaces must be fully free from dust and grease.
Otherwise, a sufficient degree of adhesion cannot be assured.

2.2

Model 907, 910
except code T16 (Sliding door right)
Right side of vehicleModel 907, 910
except code T19 (Sliding door left)Left side of vehicle
Clean roof paneling in area of bonding surfaces for dampings (1, 2, 3, 4, 5, 6, 7, 8) using cleaner.

Bonding surfaces must be fully free from dust and grease.
Otherwise, a sufficient degree of adhesion cannot be assured.

3.1

Model 907, 910
with code T16 (Sliding door right)
Right side of vehicleModel 907, 910
with code T19 (Sliding door left)Left side of vehicle
Cut new dampings (1, 2, 3, 4, 5) to size for respective dimensions (a, b, c).

3.2

Model 907, 910
except code T16 (Sliding door right)
Right side of vehicleModel 907, 910
except code T19 (Sliding door left)Left side of vehicle
Cut new dampings (1, 2, 3, 4, 5, 6, 7, 8) to size for respective dimensions (a, b, c).

4.1

Model 907, 910
with code T16 (Sliding door right)
Right side of vehicleModel 907, 910
with code T19 (Sliding door left)Left side of vehicle
Attach dampings (1, 2, 3, 4, 5) to roof paneling as shown.

4.2

Model 907, 910
except code T16 (Sliding door right)
Right side of vehicleModel 907, 910
except code T19 (Sliding door left)Left side of vehicle
Attach dampings (1, 2, 3, 4, 5, 6, 7, 8) to roof paneling as shown.