ar6000d080002h

Pound in vehicle identification number

Type ar · topic 60.00 · version 0104 · 2017-03-28

Applies to: Model 900, 906

Where it sits

Function group 3 Body › 60 Body - general › 60.00 General — Series 900 · Series 906

EinPAS 35 Body/frame/detachable parts › 35.20 Cab/body › 35.20.30 Cab — Series 900 · Series 906

EinPAS 35 Body/frame/detachable parts › 35.20 Cab/body › 35.20.40 Bodyshell — Series 900 · Series 906

AR60.00-D-0800-02H

Pound in vehicle identification number

Model

900, 906

Pound in vehicle identification number
Pound in vehicle identification number
Pound in vehicle identification number
Pound in vehicle identification number

000 589 00 39 00

Letter marking punch

000 589 01 39 00

Die stamp numbers

000 589 03 39 00

Letter marking punch

000 589 02 39 00

Star marking punch

Pound in vehicle identification number

Model 906
Use marking stamp for star at front and end of vehicle identification number (VIN).
Model 900
Use commercially available marking stamp for 5-pointed star at front and end of VIN.
Commercially available devices/tools
Marking stamp for 5-pointed start (character size 6 mm)

1

Stamp in with star stamp or 5-pointed star stamp on left end stop.


Ensure that tool is aligned correctly.
The tip of the 5-pointed star stamp or five-pointed star stamp should point upward in the typeface.



2

Position first letter or first number of VIN on left edge of 1st graduation line and stamp in.



3

Stamp in remaining VIN.


With each following letter stamp, letter stamp or number stamp, move one graduation line forward on scale until the complete VIN and the star are stamped in either with the star stamp or with the five-pointed star stamp..
The entire width of the VIN is 106 mm (4 mm).


D60.00-1107-11