ar5550b0500a

Removing and installing pressure reservoir

Type ar · topic 55.50 · version 0100 · 2016-02-12

Applies to: Vehicle 382.154, 382.155

Where it sits

Function group 2 Chassis › 55 Auxiliary drive systems, hydraulic and linkage systems › 55.50 Linkage systems — Series 382 (models 154, 155)

EinPAS 35 Body/frame/detachable parts › 35.55 Articulation system/turntable › 35.55.31 Pump/container — Series 382 (models 154, 155)

AR55.50-B-0500A

Removing and installing pressure reservoir

12.02.16

Vehicle 382.154, 382.155

Removing and installing pressure reservoir

T55.50-0007-11

1 De-pressure accumulator

Removing and installing pressure reservoir

T55.50-0043-11

8 Control block

9 Spherical valve

11 Exhaustion valve

Remove

Danger!

Risk of injuries on skin and eyes when high pressure hydraulic fluid is ejected. Risk of poisoning by ingesting hydraulic fluid

Before starting the jobs on the hydraulic system, leave the system de-pressurized. Wear adequate clothes and protection glasses.

AS00.00-B-0013-01A

1

Close the spherical valve (9)

2

Evacuate the hydraulic system pressure

Evacuate the pressure through the ventilation valve (11) of the control block (8).

Catch hydraulic fluid run-off, in an appropriate container.

3

Disconnect the threaded union of the pressure accumulator (1) on the control block (8)

4

Remove the pressure accumulator (1)

Install

5

Install the pressure accumulator (1)

6

Connect the threaded union of the pressure accumulator (1) to the control block (8)

7

Open the spherical valve (9)

8

Bleed the hydraulic system

AR55.30-B-0003A

Referenced documents