ar5465s0030ee

Remove/install backup camera

Type ar · topic 54.65 · version 0100 · 2014-08-22

Applies to: MODEL 447.6/7 with CODE FR8 (Rear view camera) with CODE W50 (Rear-end door, double-wing, 180 degrees without window) without CODE W65 (Tailgate) MODEL 447.6/7 with CODE FR8 (Rear view camera) with CODE W54 (Hinged rear doors, opening to side wall) without CODE W65 (Tailgate)

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.65 Parking assist — Series 447 (models 6**, 7**)

EinPAS 36 Visibility › 36.25 Camera system › 36.25.30 Outdoor camera — Series 447 (models 6**, 7**)

AR54.65-S-0030EE

Remove/install backup camera

30.07.2014

MODEL

447.6/7

with CODE FR8 (Rear view camera)

with CODE W50 (Rear-end door, double-wing, 180 degrees without window)

without CODE W65 (Tailgate)

MODEL

447.6/7

with CODE FR8 (Rear view camera)

with CODE W54 (Hinged rear doors, opening to side wall)

without CODE W65 (Tailgate)

Remove/install backup camera

S54.65-4649-08

1

Backup camera

3

Bracket

2

License plate lamp bracket

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and remove transmitter key

2

Detach bracket from license plate lamps (2) until the reversing camera (1) can be removed

AR72.20-S-1010E

Do not detach electrical connection from license plate lamps.

3

Unclip reversing camera (1) from bracket for license plate lamps (2) and remove

4

Remove bracket (3) from reversing camera (1)

If the bracket (3) or the reversing camera (1) is replaced.

5

Install in the reverse order

6

Calibrate reversing camera (1) using diagnostic system

AD00.00-S-2000-04E

Referenced documents