ar5465s0030e

Remove/install backup camera

Type ar · topic 54.65 · version 0202 · 2020-06-16

Applies to: Model 447.8, 448.8 with code FR8 (Rear view camera) with code W65 (Tailgate) Model 447.8, 448.8 with code JS1 (360° camera (SURROUND VIEW)) with code W65 (Tailgate) Model 447.8 with code FR8 (Rear view camera) with code W68 (Electrically operated liftgate) Model 447.8 with code JS1 (360° camera (SURROUND VIEW)) with code W68 (Electrically operated liftgate)

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.65 Parking assist — Series 447 (models 8**) · Series 448 (models 8**)

EinPAS 36 Visibility › 36.25 Camera system › 36.25.30 Outdoor camera — Series 447 (models 8**) · Series 448 (models 8**)

AR54.65-S-0030E

Remove/install backup camera

16.06.2020

Model

447.8, 448.8

with code FR8 (Rear view camera)

with code W65 (Tailgate)

Model

447.8, 448.8

with code JS1 (360° camera (SURROUND VIEW))

with code W65 (Tailgate)

Model

447.8

with code FR8 (Rear view camera)

with code W68 (Electrically operated liftgate)

Model

447.8

with code JS1 (360° camera (SURROUND VIEW))

with code W68 (Electrically operated liftgate)

Modification notes

25.09.2015

"Perform initial startup using diagnostic system" added.

Operation step 6

29.09.2015

Information on calibration revised.

Operation step 7

Remove/install backup camera

1

Handle outside

2

Catch hook

3

Fuse

B84/4

Rear 360° camera

B84/5

Reversing camera (RFK) control unit

S54.65-4572-06

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and remove transmitter key

2

Remove outer handle (1) on liftgate

AR72.20-S-7320E

3

Remove catch hook (2) and retainer (3) from outer handle (1)

4.1

Remove reversing camera control unit (B84/5)

Model 447.8, 448.8 with code FR8 (Reversing camera)

Pay attention to the installation position of the reversing camera control unit (B84/5).

4.2

Remove rear 360° camera (B84/4)

Model 447.8, 448.8 with code JS1 (360° camera)

Pay attention to the installation position of the rear 360° camera (B84/4).

5

Install in the reverse order

6

Perform initial startup of rear 360° camera (B84/4) or reversing camera control unit (B84/5) using diagnostic system

If rear 360° camera (B84/4) or reversing camera control unit (B84/5) has been replaced.

AD00.00-S-2000-04E

7

Calibrate rear 360° camera (B84/4) using diagnostic system

Model 447.8, 448.8 with code JS1 (360° camera)

AD00.00-S-2000-04E

Referenced documents