ar5465p0002tx

Remove/install Parktronic system (PTS) sensors in rear bumper

Type ar · topic 54.65 · version 0100 · 2004-08-26

Applies to: MODEL 219.3 with CODE (220) Parktronic system (PTS)

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.65 Parking assist — Series 219 (models 3**)

EinPAS 28 Convenience system/driver assistance system › 28.15 Parking Assist › 28.15.12 Sensor/switch/wiring harness — Series 219 (models 3**)

AR54.65-P-0002TX

Remove/install Parktronic system (PTS) sensors in rear bumper

16.6.04

MODEL 219.3 with CODE (220) Parktronic system (PTS)

Remove/install Parktronic system (PTS) sensors in rear bumper

P54.65-2930-07

1 Rear bumper

2 Electrical connector

3 Sealing ring

A43b9 Left inner sensor

A43b10 Left outer sensor

A43b7 Right outer sensor, rear bumper

A43b8 Right inner sensor

Remove/Install

1

Remove rear bumper (1)

AR88.20-P-2200TX

2

Unclip sensor (A43b7, A43b8, A43b9 or A43b10) from rear bumper (1)

Installation: Check sealing ring (3) and replace if damaged.

3

Separate electrical connector (2) from sensor (A43b7, A43b8, A43b9 or A43b10)

Installation: Ensure that electrical connector (2) is seated properly.

4

Install in the reverse order

Referenced documents