P54.65-5366-07
Shows on model 453.3 |
1 | Electrical connectors | B8/8 | Right rear parking system distance sensor | B8/10 | Center rear parking system distance sensor | ||
3 | Retaining clips | B8/9 | Left rear parking system distance sensor |
P54.65-5367-07
Shows on model 453.3 |
1 | Electrical connectors | 4 | Rear apron | B8/9 | Left rear parking system distance sensor | ||
2 | Rear bumper | 5 | Heat shield | B8/10 | Center rear parking system distance sensor | ||
3 | Retaining clips | B8/8 | Right rear parking system distance sensor |
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Detach fender liner in the area of rear apron (4) | Model 453.3/4 | |
2 | Unclip rear apron (4) from rear bumper (2) | Model 453.3/4 | |
Clip remover | |||
3 | Remove heat shield (5) in the area of center rear parking system distance sensor (B8/10) |
| |
4 | Separate electrical connections (1) | ||
5 | Unclip parking system distance sensors (B8/8, B8/9, B8/10) from retaining clip (3) and remove | Installation: Check parking system distance sensors (B8/8, B8/9, B8/10) are correctly seated into retaining clips (3). | |
6 | Install in the reverse order | ||
| Check | ||
7 | Read out fault memory using diagnostic unit and delete | ||
|
452 589 01 63 00
Clip remover
Referenced documents
- ad0000p200006sr Connect/disconnect diagnostic unit
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar8810p1400sra Remove/install fender liner in rear fender
- ar8820p1925sra Remove/install heat shield