ar5465p0002rt

Remove/install Parktronic system (PTS) sensors in rear bumper

Type ar · topic 54.65 · version 0100 · 2005-06-29

Applies to: MODELS 251 with CODE (220) Parktronic system (PTS)

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.65 Parking assist — Series 251

EinPAS 28 Convenience system/driver assistance system › 28.15 Parking Assist › 28.15.12 Sensor/switch/wiring harness — Series 251

AR54.65-P-0002RT

Remove/install Parktronic system (PTS) sensors in rear bumper

2.2.05

MODELS 251 with CODE (220) Parktronic system (PTS)

Remove/install Parktronic system (PTS) sensors in rear bumper

P54.65-3030-07

1 Electrical connector

2 Circlip

3 Sealing ring

B8/7 Outer right rear PTS ultrasonic sensor

B8/8 Inner right rear PTS ultrasonic sensor

B8/9 Inner left rear PTS ultrasonic sensor

B8/10 Outer left rear PTS ultrasonic sensor

Remove/install

1

Remove rear bumper

AR88.20-P-2200RT

2

Disconnect electrical connector (1).

3

Unlock the corresponding circlip (2) using the unlocking tool

Release tool

*168589023100

4

Take outer right rear PTS ultrasonic sensor (B8/7) or inner right rear PTS ultrasonic sensor (B8/8) or inner left rear PTS ultrasonic sensor (B8/9) or outer left rear PTS ultrasonic sensor (B8/10) out of the bumper

Installation: Check sealing ring (3) and replace if damaged.

5

Install in the reverse order

Remove/install Parktronic system (PTS) sensors in rear bumper

Unlocking tool

168 589 02 31 00

Referenced documents