ar5465p0002mfa

Remove/install Parktronic system (PTS) sensors in rear bumper

Type ar · topic 54.65 · version 0102 · 2019-03-29

Applies to: Model 118, 247 with code 235 (Parking Pilot with PARKTRONIC) Model 177 with code 235 (Active Parking Assist with PARKTRONIC)

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.65 Parking assist — Series 118 · Series 177 · Series 247

EinPAS 28 Convenience system/driver assistance system › 28.15 Parking Assist › 28.15.12 Sensor/switch/wiring harness — Series 118 · Series 177 · Series 247

AR54.65-P-0002MFA

Remove/install Parktronic system (PTS) sensors in rear bumper

25.03.2019

Model

118, 247

with code 235 (Parking Pilot with PARKTRONIC)

Model

177

with code 235 (Active Parking Assist with PARKTRONIC)

Remove/install Parktronic system (PTS) sensors in rear bumper

P54.65-6296-08

1

Bumper

B8/9

Inner left rear parking system distance sensor

2

Electrical connector

B8/10

Outer left rear parking system distance sensor

3

Locks

B8/11

Center left rear parking system distance sensor

B8/7

Outer right rear parking system distance sensor

B8/12

Center right rear parking system distance sensor

B8/8

Inner right rear parking system distance sensor

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove rear bumper (1)

AR88.20-P-2200MFA

2

Release and disconnect electrical connectors (2)

3

Pull locks (3) lightly outwards and remove rear parking system distance sensors (B8/7, B8/8, B8/9, B8/10, B8/11, B8/12) from bumper (1)

Check

4

Check respective seal of rear parking system distance sensors (B8/7, B8/8, B8/9, B8/10, B8/11, B8/12).

In the event of complaints

Replace corresponding seal.

5

Install in the reverse order

Referenced documents