ar5465p0002eq

Remove/install Parktronic system (PTS) sensors in rear bumper

Type ar · topic 54.65 · version 0100 · 2019-05-23

Applies to: Model 293 with code 235 (Active Parking Assist with PARKTRONIC)

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.65 Parking assist — Series 293

EinPAS 28 Convenience system/driver assistance system › 28.15 Parking Assist › 28.15.12 Sensor/switch/wiring harness — Series 293

AR54.65-P-0002EQ

Remove/install Parktronic system (PTS) sensors in rear bumper

12.04.2019

Model

293

with code 235 (Active Parking Assist with PARKTRONIC)

Remove/install Parktronic system (PTS) sensors in rear bumper

1

Electrical connector

2

Bracket

3

Seal

B8/7

Outer right rear parking system distance sensor

B8/8

Inner right rear parking system distance sensor

B8/9

Inner left rear parking system distance sensor

B8/10

Outer left rear parking system distance sensor

B8/11

Center left rear parking system distance sensor

B8/12

Center right rear parking system distance sensor

P54.65-A047-06

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1.1

Remove underbody paneling.

For removal of rear parking system distance sensors (B8/7, B8/10).

AR61.30-P-1001EQ

1.2

Remove rear bumper.

When removing the rear parking system distance sensors (B8/8, B8/9, B8/11, B8/12) or when removing all the rear parking system distance sensors (B8/7, B8/8, B8/9, B8/10, B8/11, B8/12).

AR88.20-P-2200LWG

2

Release and disconnect electrical connector (1) at rear parking system distance sensor (B8/7, B8/8, B8/9, B8/10, B8/11, B8/12).

3

Release catch hooks of holder (2) in direction of arrow and remove rear parking system distance sensor (B8/7, B8/8, B8/9, B8/10, B8/11, B8/12) from holder.

Installation: Ensure that seal (3) is seated properly.

4

Install in the reverse order.

Referenced documents