ar5465p0002a

Removing and installing Parktronic System (PTS) sensors in rear bumper

Type ar · topic 54.65 · version 0102 · 2000-06-19

Applies to: MODELS 208, 210.0 with CODE (220a) Parktronic System (PTS)

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.65 Parking assist — Series 208 · Series 210 (models 0**)

EinPAS 28 Convenience system/driver assistance system › 28.15 Parking Assist › 28.15.12 Sensor/switch/wiring harness — Series 208 · Series 210 (models 0**)

AR54.65-P-0002A

Removing and installing Parktronic System (PTS) sensors in rear bumper

4.11.96

MODELS 208, 210.0 with CODE (220a) Parktronic System (PTS)

Removing and installing Parktronic System (PTS) sensors in rear bumper

P54.65-2307-09

Model 208

1 Parktronic System sensors in rear bumper

X35/28 Rear bumper Parktronic System (PTS) connector

2 Seal

3 Coupling at sensor

4 Damping elements

Removing and installing Parktronic System (PTS) sensors in rear bumper

P54.65-2308-09

Model 210

1 Parktronic System sensors in rear bumper

6 Adhesive tape

X35/28 Rear bumper Parktronic System (PTS) connector

2 Seal

3 Coupling at sensor

4 Damping elements

Removal, installation

1

Remove rear bumper

Model 208

AR88.20-P-2200K

Model 210

AR88.20-P-2200F

2.1

Disconnect rear bumper Parktronic system (PTS) connector (X35/28) in trunk on right side

Model 208

Pull lead with grommet out of trunk to side.

2.2

Disconnect rear bumper Parktronic system (PTS) connector (X35/28) in trunk on left side

Model 210

Pull lead with grommet downward out of trunk.

3

Unclip damping elements (4)

4

Unclip Parktronic System sensor (1) from bracket

*140589063100

5

Disconnect connector (3) from sensor (1)

6

Remove seal (2) from sensor (1)

7

Install in the reverse order

Removing and installing Parktronic System (PTS) sensors in rear bumper

Releasing tool

140 589 06 31 00

Referenced documents