P54.30-8328-09
1 Bolts
2 Rag
A1 Instrument cluster
3 Electrical connector
Modification notes
| Remove/install | ||
| Notes on avoiding damage to electronic components due to electrostatic discharge | ||
1.1 | Connect STAR DIAGNOSIS and buffer the default data from the instrument cluster (A1) in STAR DIAGNOSIS | When installing new instrument cluster (A1). | |
Installation: Transfer the cached basic data to the new instrument cluster (A1). | |||
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system | |||
2 | Remove cover from instrument cluster (A1) | ||
3 | Remove bolts (1) | Bolts (1) remain in instrument cluster (A1). | |
4 | Place rag (2) on steering column and on wood trim of instrument panel | If no rag (2) is used, wood trim on instrument panel could be damaged when instrument cluster (A1) is being removed. | |
5 | Pull instrument cluster (A1) out of instrument panel until electrical connector (3) is accessible | ||
6 | Unplug electrical connector (3) and remove instrument cluster (A1) | ||
7 | Install in the reverse order |
Commercially available tools
Referenced documents
- ad0000p200004tx Connect STAR DIAGNOSIS and read out fault memory
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar6810p1550tx Remove/install cover on instrument cluster