P54.30-0216-05
A1 Instrument cluster
1 Setting knob
2 Setting knob
| It is possible to set the odometer display only once during the first 300 km/miles or 10 km in the case of the version | ||
1 | Turn key in steering lock to position "2" | ||
2 | Press knob (1) and hold | A signal sounds after about 10 s and the display is set to | |
3 | Turn key to position "0" and then back to position "2" | "Prog" appears in the trip counter display - - - - - appears in the odometer display | |
4 | Release knob (1) | ||
5 | Pull out knob (2) and turn to the left in direction of arrow | Digit of 1st position is set to | |
6 | Release knob (2), pull out again and turn to the left | Digit of 1st position is set to Repeat operation until the desired digit is set The digit must be set after | |
7 | Pull out knob (2) and turn to the right in opposite direction of arrow | The digit appears in the 2nd position Set desired digit as described for setting the 1st position To set the desired digits for positions 3 to 6, proceed as described for the 1st and 2nd positions Only even digits eg. , ..... can be | |
8 | Store odometer reading; press knob (1) to do this and turn key to position "0" | ||
9 | Release knob (1) | ||
10 | Check setting; turn key to position "2" to do this | If entry is incomplete or if odometer entry of more than 300 km/miles or 10 km for version, counter is set to when stored. Repeat setting. |