P54.30-8578-11
The vehicle must be horizontal for at least 5 minutes with the engine switched off at operating temperature, otherwise there will be measuring errors.
1 Switch on ignition.
2 Press the system selection button (S110s3) repeatedly until the "Service" menu appears in bolt in the multifunction display (A1p13).
3 Press the scroll forward/back button (S110s1) repeatedly and select "engine oil level".
4 Press OK button (S110s6).
The note "engine oil level, measurement in progress, correct measurement only if the vehicle is level" appears in the multifunction display (A1p13).
5 The measurement result is shown in the multifunction display (A1p13).
6 Correct the engine oil level if necessary and check engine oil level again.
7 Switch off ignition.