Remove/install steering column module

AR54.25-S-2802CA

Remove/install steering column module

06.11.2018

Model

415

Shown with code MS1 (Cruise control)

1

Steering column module

4

Electrical wiring harnesses

2

Screw

5

Line bracket

3

Electrical connectors

6

Steering column tube

1

Steering column module

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove steering column trim.

AR68.30-S-2000C

2

Secure clock spring contact of steering column tube module (1) against twisting using a suitable adhesive strip.


Ensure that clock spring contact of steering column tube module (1) is in center position (arrow B).
Observe note on clock spring contact.
Otherwise, the clock spring contact may be destroyed.

 The clock spring contact is part of the steering column tube module (1) and cannot be ordered individually.

3

Loosen screw (2).

4

Detach steering column tube module (1) rearward from steering column tube (6) and remove until the electrical connectors (3) are accessible.

 Installation: Ensure that the support of the steering column tube module (1) is aligned with the groove of the steering column tube (6) (arrow A).

5

Release and disconnect electrical connectors (3).

6

Unclip electrical wiring harnesses (4) at line bracket (5) from steering column tube module (1) and remove steering column tube module (1).

 Clip remover

*452589016300

7

Install in the reverse order



Check

8

Carry out function test of all components of the steering column tube module (1).