ar5425p2000tx

Remove/install contact switch for door

Type ar · topic 54.25 · version 0100 · 2004-10-05

Applies to: MODEL 219.3 door contact switch (front)

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.25 Switches — Series 219 (models 3**)

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.12 Sensor/switch/wiring harness — Series 219 (models 3**)

EinPAS 29 Drive authorization/security system › 29.20 Anti-theft alarm system › 29.20.12 Sensor/switch/wiring harness — Series 219 (models 3**)

EinPAS 30 Lighting system › 30.20 Interior illumination › 30.20.12 Sensor/switch/wiring harness — Series 219 (models 3**)

AR54.25-P-2000TX

Remove/install contact switch for door

12.8.04

MODEL 219.3
door contact switch (front)

Remove/install contact switch for door

P54.25-4343-06

1 Edge guard

2 B-pillar

3 Electrical connector

S17/3 Left front door contact switch

S17/4 Right front door contact switch

Remove/Install

1

Pull edge guard (1) off B-pillar (2) until left front door contact switch (S17/3) or right front door contact switch (S17/4) is accessible from rear

2

Press latching hook (arrow) using a suitable screwdriver and unclip left front door contact switch (S17/3) or right front door contact switch (S17/4) from B-pillar (2)

3

Unplug electrical connector (3) and remove left front door contact switch (S17/3) or right front door contact switch (S17/4).

4

Install in the reverse order