ar5425d2807a

Remove/install multifunction control lever

Type ar · topic 54.25 · version 0100 · 2014-10-16

Applies to: MODEL 668, 670 with CODE SA5 (Airbag, front driver's seat)

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.25 Switches — Series 668 · Series 670

EinPAS 25 On-board/network/multifunction › 25.15 Network/multifunction › 25.15.18 Switch/switch group/control panel — Series 668 · Series 670

AR54.25-D-2807A

Remove/install multifunction control lever

30.09.2014

MODEL

668, 670

with CODE SA5 (Airbag, front driver's seat)

Remove/install multifunction control lever

1

Multifunction control lever

2

Clock spring contact

3

Bolts

4

Adhesive tape (retainer)

5

Bolts

D54.25-1118-06

Remove/install multifunction control lever

6

Steering column trim

7

Bolts

8

Electrical connector (multifunction control lever)

9

Electrical connector (clock spring contact)

10

Cable tie

D54.25-1119-06

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove steering wheel

AR46.10-D-0100F

2

Remove cover below dashboard

AR68.10-L-1500A

3

Unscrew bolts (7) and remove steering column trim (6)

4

Cut open cable tie (10)

5

Disconnect electrical connectors (8, 9) of clock spring contact (2) and electrical connector of multifunction control lever (1) in footwell

6

Unscrew bolts (3) and pull off clock spring contact (2)


Secure clock spring contact (2) with adhesive tape (4) to prevent it from twisting before pulling it off.
Otherwise the clock spring contact (2) could be irreparably damage by steering movements while driving.

7

Unscrew bolts (5) of multifunction control lever (1) and remove multifunction control lever (1)

Installation:
Do not tap the threaded holes. The self-tapping screws (3) may only be screwed in when the multifunction control lever (1) is in the specified installation position.
Otherwise the detent for the switch positions will be destroyed and the multifunction control lever (1) will jump out of the switch position.

8

Install in the reverse order

Referenced documents