ar5415p923101sn

Disconnecting and connecting engine wiring harness

Type ar · topic 54.15 · version 0100 · 2003-12-04

Applies to: MODEL 450.3 /4 with ENGINE 660.940

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.15 Fuse and relay box — Series 450 (models 3**, 4**) · Series 660 (models 940)

EinPAS 25 On-board/network/multifunction › 25.25 Main wiring harness › 25.25.20 Engine wiring harness — Series 450 (models 3**, 4**) · Series 660 (models 940)

AR54.15-P-9231-01SN

Disconnecting and connecting engine wiring harness

Generator

Number

Designation

Engine
660.940

BA15.40-P-1001-01H

Cable to generator terminal D+

Nm

8

BA15.40-P-1002-01H

Cable to generator terminal B+

Nm

8

Disconnecting and connecting engine wiring harness

P54.18-3363-06

1 Disconnect plug (1).

2 Disconnect connector (2) at turning angle sensor (3).

3 Disconnect connector (4) at gear motor (M17).

Disconnecting and connecting engine wiring harness

P54.00-2353-01

4 Disconnect connector (5).

Disconnecting and connecting engine wiring harness

P15.18-2084-06

5 Detach hose (7) at air filter box (6).

6 Unplug both connectors at EDG control module (N3/9).

Pull notch lever backwards at connectors and unplug connectors.

7 Unplug connector at preheating time control module (N14/2).

8 Unplug connector at intake air temperature sensor (B17).

9 Disconnect electrical lines at generator (G2).