AR54.15-P-2000W | Remove/install additional battery relay | 8.12.10 |
MODEL 172 with CODE (B03) ECO start/stop function
P54.15-3394-06
1 Pocket
2 Coat hanger hook
3 Plastic nuts
4 Rear wall cover
5 Nut
6 Electrical line
7 Nut
8 Electrical line
9 Electrical connector
10 Nut
K114 ECO start/stop function additional battery relay
| Remove/install | ||
Danger! | Risk of injury caused by backrest suddenly folding forward if release lever is accidentally operated during inspection and repair work | When working on the seat, be careful not to accidentally release the backrest mechanism allowing the seat to fold forward. Keep body parts clear of the backrest travel area. | |
1 | Move both seats to front position and fold backrests forward | ||
2 | Detach ground line of on-board electrical system battery | ||
3 | Disconnect ground line of ECO start/stop function additional battery | ||
4 | Remove pocket (1) | ||
5 | Unscrew coat hook (2) and plastic nut (3) | ||
6 | Detach rear wall cover (4) at bottom from floor covering until ECO start/stop function additional battery relay (K114) is accessible | ||
7 | Unscrew nut (5) and remove electrical line (6) | ||
8 | Unscrew nut (7) and remove electrical line (8) | ||
9 | Disconnect electrical connector (9) | ||
10 | Unscrew nuts (10) on ECO start/stop function additional battery relay (K114) | ||
11 | Detach ECO start/stop function additional battery relay (K114) from rear wall | ||
12 | Install in the reverse order |
Referenced documents
- ar5410p0003w Disconnect/connect battery ground line
- ar5410p0007w Remove/install additional battery
- as9100z000501v Risk of injury caused by backrest suddenly folding forward if release lever is accidentally operated during inspection and repair work