Disconnect/connect engine wiring harness

Type ar · topic 54.15 · version 0102 · 2010-06-18

Applies to: MODEL 906 with ENGINE 646.984 /985 /986 /989 /990 Ausbau Motor

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.15 Fuse and relay box — Series 646 (models 984, 985, 986, 989, 990) · Series 906

EinPAS 25 On-board/network/multifunction › 25.25 Main wiring harness › 25.25.20 Engine wiring harness — Series 646 (models 984, 985, 986, 989, 990) · Series 906

AR54.15-D-9231-01SE

Disconnect/connect engine wiring harness

D54.15-1130-06

1 Detach electrical wiring harness (1) from body.

 Installation: Make sure that the grommet (3) is seated correctly in the battery box (2).

2 Disconnect electrical connector (5) and remove cable ties from electrical lines.

 Installation: Install new cable ties.

3 Disconnect electrical connector (4).

 Only with engine 646.984/985/986.

Shown on engine 646.985

D54.15-1129-06

4 Disconnect electrical connectors (6, 7)

5 Disconnect electrical connector (8).

6 Connect in reverse order.

Shown on engine 646.985