AR54.15-D-1256EC | Remove fuse box | 18.3.05 |
MODEL 903.6 with CODE (ZL9) "James Cook" touring camper
On belt bracket
D54.15-1128-09
Shown on model 903.662 with National version for USA code ZU8 and "James Cook" touring camper, NAFTA code Z29
1 Bolts
F72 12V fuse strip
2 Belt support
4 Electrical connectors
| Remove/install | ||
Danger! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Move bench seat forward | See Operator's Manual | |
2 | Remove bolts (1) | ||
3 | Pull 12 V fuse strip (F72) out of belt bracket (2) | ||
4 | Disconnect electrical couplings (4) from 12 V fuse strip 12 V (F72) | ||
5 | Install in the reverse order | ||
6 | Carry out function check | All electrical components which are fused via the 12 V fuse strip (F72) (see operator's manual). |
Referenced documents
- as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.