P54.10-2657-09
Illustrated on model 251
1 Trim
2 Housing cover
3 Housing
4 Electrical connector
5 Catch lugs
X58/1 Interior socket
| Remove/install | ||
1 | Fold up housing lid (2) | The interior socket (X58/1) is located in the trim (1) on the bottom right-hand side of the cockpit. | |
2 | Use pliers to detach the interior socket (X58/1) from the housing (3) and pull out (arrow A) | Do not turn the interior socket (X58/1) when pulling out | |
Installation: Ensure that the two guides (arrows B) are inserted in the grooves of the housing (3). Slide in the interior socket (X58/1) until it latches in the housing (3) (arrow C). | |||
Pliers | |||
3 | Disconnect electrical connector (4) | ||
4 | Remove housing (3) from the trim (1) | Loosen the housing (3) at the two catch lugs (5) and pull out of the trim (1). | |
5 | Install in the reverse order |
Pliers
169 589 00 37 00