ar5410p0010rt

Remove/install cargo area socket

Type ar · topic 54.10 · version 0100 · 2005-09-27

Applies to: MODEL 251

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.10 Battery, power supply, voltage converter — Series 251

EinPAS 25 On-board/network/multifunction › 25.20 On-board electrical system › 25.20.50 Socket/ground point/jump-start connection point — Series 251

AR54.10-P-0010RT

Remove/install cargo area socket

4.8.05

MODEL 251

Remove/install cargo area socket

P54.10-2656-09

1 Trim

2 Housing cover

3 Housing

4 Electrical connector

5 Catch lugs

X58/4 Load compartment socket

 	Remove/install
1	Open tailgate	 The load compartment socket (X58/4) is located in the trim (1) at the right side of the load compartment.
2	Fold up housing lid (2)
3	Use pliers to release load compartment socket (X58/4) from housing (3) and to pull it out (arrow A)	 Do not turn the load compartment socket (X58/4) when pulling out
		 Installation : Ensure that the two guides (arrows B) are inserted in the grooves of the housing (3). (X58/4) Slide the load compartment socket into the housing (3) until it latches (arrow C).
		 Pliers	*169589003700
4	Separate electrical connector (4)
5	Remove housing (3) from the trim (1)	 Loosen the housing (3) at the two catch lugs (5) and pull out of the trim (1).
6	Install in the reverse order

Remove/install cargo area socket

Pliers

169 589 00 37 00