ar4920b2011evi

Remove/install temperature sensor upstream of SCR catalytic converter

Type ar · topic 49.20 · version 0100 · 2019-02-19

Applies to: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Where it sits

Function group 1 Engine › 49 Exhaust system, exhaust gas cleaning › 49.20 Exhaust gas aftertreatment — Series 382 (models 155, 189) · Series 936 (models 9**)

EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.12 Sensor/switch/wiring harness — Series 382 (models 155, 189) · Series 936 (models 9**)

AR49.20-B-2011EVI

Remove/install temperature sensor upstream of SCR catalytic converter

04.02.2019

Engine	936.9 in model 382.155/189
	with code MS6 (Euro VI)

Remove/install temperature sensor upstream of SCR catalytic converter

17B09

Exhaust gas temperature sensor before the diesel oxidation catalyst

B49.20-A008-06

 	Remove/install
 Warning	Risk of burn injuries and scalding when working on AdBlue(R) lines and the component parts attached to them. Risk of injury to skin and eyes when handling AdBlue(R). Risk of poisoning caused by swallowing AdBlue(R)	Pour AdBlue® only into suitable containers. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.	AS49.20-Z-0002-01A
 Warning	Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
Topical note	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Turn off ignition
2	Disconnect the electric connector and detach the electric wire
3	Remove the exhaust gas temperature sensor before the diesel oxidation catalytic converter (17B09)	 Installation: Lubricate the thread of the exhaust gas temperature sensor before the diesel oxidation catalyst (17B09)
		Paste, hot lubrication 1 kg, DBL 6879.20	*BR00.45-Z-1005-06A
		 Exhaust gas temperature sensor before the diesel oxidation catalytic converter	*BA49.20-B-1006-01EVI
4	Install in reverse order

 Exhaust gas after-treatment unit

Number	Designation			Engine 936.9 in Type 382.155/189
BA49.20-B-1006-01EVI	Exhaust gas temperature sensor before the diesel oxidation catalytic converter	M141,5	Nm	30

Repair materials

Number	Designation	Order number
BR00.45-Z-1005-06A	Paste, hot lubrication 1 kg, DBL 6879.20	A 000 989 76 51

Referenced documents

ah0000n000101a Notes on self-locking nuts and bolts
as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
as4920z000201a Risk of burn injuries and scalding when working on AdBlue(R) lines and the component parts attached to them. Risk of injury to skin and eyes when handling AdBlue(R). Risk of poisoning caused by swallowing AdBlue(R)