Remove/install metering device of exhaust gas aftertreatment system

AR49.20-B-2002EVI

Remove/install metering device of exhaust gas aftertreatment system

30.05.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

1

Exhaust gas after-treatment unit

4

AdBlue® return line

7

Bolts

2

Support

5

Wiring harness

8

Seal

3

Electrical connector

6

AdBlue® feed line

A67

AdBlue® metering unit

 Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

 

Remove/install

1

Turn off ignition

2

Loosen the wiring harness (5)

3

Remove the AdBlue® metering unit (A67) from the exhaust gas after-treatment unit (1)

 Installation: Replace the gasket (8) and the bolts (7)

 AdBlue® metering device in the exhaust gas aftertreatment system

*BA49.20-B-1015-02EVI

4

Detach the electrical connector (3)

5

Remove the AdBlue® feed line (6)

 Collect the AdBlue® that seeps in an appropriate container and discard it.

6

Remove the AdBlue® return line (4)

 Collect the AdBlue® that seeps in an appropriate container and discard it.

7

Install in reverse order

8

Check the leak-tightness in the separating points of the lines

 Visual inspection.

 Exhaust gas aftertreatment, BlueTec(R)

Number

Designation

Engine 936.9 in the Type 382.155/189 with Code MS6 (Euro VI)

BA49.20-B-1015-02EVI

AdBlue® metering device in the exhaust gas aftertreatment system

Nm

10