W47.10-0001-06
1 Side paneling holder
2 Vent line
3 Fuel tank
3.1 Cap
4 Fuel line (return flow)
5 Connector
6 Fuel line (feed)
7 Retaining clip
8 Side paneling
B22 Fuel fill level sensor
Modification notes
| Remove/install | ||
Danger! | Risk of explosion caused by ignition of flammable products, risk of poisoning caused by inhaling fuel vapors or swallowing fuel as well as risk of injury to skin and eyes exposed to fuel. | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
1 | Switch off ignition | ||
2 | Disconnect electrical connectors for side marker lamps | ||
3 | Remove side paneling (8). | ||
4 | Open cap (3.1) | ||
5 | Drain off fuel from fuel tank (3) | Collect fuel in a suitable safety container. | |
7 | Detach fuel lines, (4, 6) on fuel fill level sensor (B22) | Identify fuel lines (4, 6). The fuel lines (4, 6) can be removed by side pressure on the plug connections. Collect escaping fuel in a suitable safety container. | |
Installation: Observe identification of fuel lines (4, 6). | |||
8 | Take off vent line (2) | ||
9 | Disconnect plug (5) on fuel fill level sensor (B22) | ||
10 | Remove retaining clip (7) | | |
11 | Remove fuel tank (3) | ||
12 | Remove fuel fill level sensor (B22) | Only if the fuel tank (3) is replaced. | |
13 | Install in the reverse order |
Fuel tank
Referenced documents
- ar4710w7000a Remove/install fuel level sensor
- as4700z000101a Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.