P47.10-0282-06
Shown on model 140.057/076 without code (282a) Ski bag (through-loading feature)
26 Fuel strainer
26/1 O-ring
53 Fuel hose on the suction side with connection fitting
74 Return hose
75 Fuel tank
75/5 Sound insulation strip
76/1 Vent line
P47.10-0283-06
MODEL 140 with CODE (282a) Ski bag (through-loading feature)
26 Fuel strainer
26/1 O-ring
53 Fuel hose on the suction side with connection fitting
74 Return hose
75 Fuel tank
75/5 Sound insulation strip
78 Ski bag mounting console
B4 Fuel level sensor
| Remove/install | ||
Danger! | Risk of explosion caused by ignition of flammable products, risk of poisoning caused by inhaling fuel vapors or swallowing fuel as well as risk of injury to skin and eyes exposed to fuel. | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
1 | Empty/fill fuel tank | ||
Pay attention to quantity | |||
2 | Remove trim panel of fuel tank as well as left and right side trim panel of trunk | ||
3 | Detach fuel hose on the suction side (53), fuel return hose (74) and vent line (76/1) | Collect remaining fuel, seal connections | |
| |||
| |||
4 | Remove/install expansion reservoir | Only for vehicles with code (282) Ski bag (through-loading feature) | |
5 | Remove bearing bracket (78) of ski bag mount | Only for vehicles with code (282) Ski bag (through-loading feature) | |
6 | Take out fuel tank (75) | For SA "Sound system Bose": | |
Remove/install amplifier unit. See repair instructions for electrical system II model 140 step No. 82-7720 | |||
7 | Check sound insulation strip (75/5) | Replace if necessary. Stick on sound insulation strip (self-adhesive). | |
8 | Remove fuel strainer (26) | Clean and inspect whether part can be re-used | |
The splash bowl in the fuel tank is secured against turning with 2 pins. It is attached together with the fuel strainer (26) | |||
| |||
9 | Replace O-ring (26/1) | Oil to facilitate installation | |
10 | Install in the reverse order | ||
11 | Dispose of fuel tank |
Fuel tank
Number | Designation | Model | ||
BA47.10-P-1001-01B | Fuel strainer in fuel tank | Nm | 40 | |
BA47.10-P-1004-01B | Fuel hose with connection fitting on fuel strainer | Nm | 30 | |
Fuel tank
Number | Designation | Model | Model | ||
BF47.10-P-1001-01A | Fuel tank capacity | Total filling capacity | Liters | 100 | 90 |
Reserve capacity | Liters | 12.5 | 12.5 | ||
000 589 71 03 00
Box wrench bit, Delco R4 and A6
Referenced documents
- ar4710p4001b Empty/fill fuel tank
- ar4710p4001b
- ar4710p8021d Removing and installing expansion reservoir
- as4700z000101a Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.
- os4710p000101a Disposing of fuel tanks