P47.10-0287-06
26 Fuel strainer
26/1 O-ring
53 Fuel hose at suction end with connection fitting
72 Cup seal
73 Cup seal
74 Fuel return hose
75 Fuel tank
75/4 Cup seal
75/5 Sound-deadening strip
76/1 Vent pipe
| Removal, installation | ||
| Risk of explosion | Pay attention to accident prevention regulations! | |
1 | Empty fuel tank (75) | Pump out fuel carefully so that no fuel remains in the tank | |
| |||
2 | Remove fuel tank trim and also left and right side trim of trunk | ||
3 | Take off fuel hose at suction end (53), fuel return hose (74) and vent pipe (76/1) | Collect remaining fuel, seal connections | |
| |||
| |||
4 | Unscrew nuts of fuel tank (75) | ||
5 | Take out fuel tank (75) | Check whether cup seals (72, 73, 75/4) can be re-used and are correctly fitted | |
6 | Examine sound deadening strip (75/5) | replace, if necessary. Stick on sound-deadening strip (self-adhesive) | |
7 | Remove fuel strainer (26) | Clean and check whether strainer can be re-used | |
The splash pot in the fuel tank is prevented from turning by 2 bolts. It is attached with the fuel strainer (26) | |||
| |||
8 | Replace O-ring (26/1) | Oil to facilitate installation | |
9 | Install in the reverse order |
Fuel tank
Number | Designation | Model 124.034/ | ||
BA47.10-P-1001-01B | Fuel strainer in fuel tank | Nm | 40 | |
BA47.10-P-1004-01B | Fuel hose with connection fitting to fuel strainer | Nm | 30 | |
Fuel tank
Number | Designation | Model | ||
BF47.10-P-1001-01A | Tank capacity | Total capacity | liters | 90 |
Reserve capacity | liters | 11 | ||
000 589 71 03 00
Box wrench socket