Remove/install and adjusting electrical lifting magnet on operating lever · ar4670g1007b · Mercedes-Benz WIS

AR46.70-G-1007B

Remove/install and adjusting electrical lifting magnet on operating lever

21.2.08

MODEL 405.100 /101 /102 /103 /120 /121 /122 /123 /200 /201 /220 /221 with CODE (C50) Vario pilot, right/left transferable steering

G46.70-3108-11

1 Connector

2 Lifting magnet

3 Nut

4 Nut

5 Feeler gauge

6 Switches

7 Switching contact

	Removing
1	Turn key in steering lock to position "0"
2	Remove steering wheel		AR46.10-G-0100B
3	Remove steering column cover		*000589011000
4	Remove lifting magnet (2)
	Install
5	Install lifting magnet (2)	 Screw nut (3) all the way on and insert lift solenoid (2) into bracket. Screw on nut (4) until it is flush with the front of the housing. Tighten lift solenoid (2) with nut (3).
	Adjust
6	Adjust switch (6)	 Adjust switch (6) with feeler gage (5) so that there is a play of approx. 1.0 mm between the switching contact (7) and the housing. Switch (6) can be slid in elongated hole. The contact pin of the lifting magnet (2) must not be pushed to the right out of the housing after adjusting.
7	Install steering column cover		*000589011000
8	Install steering wheel		AR46.10-G-0100B

Torx bit set

000 589 01 10 00