T46.40-0032-01
T46.40-0033-01
T46.40-0034-01
View of right hand side
2 Right hand steering knuckle arm
3 Tie rod end on steering knuckle arm
4 Tie rod end on intermediate lever
5 Right hand tie rod
6 Intermediate lever
View of center
4 Tie rod end on intermediate lever
5 Right hand tie rod
6 Intermediate lever
8 Left hand tie rod
9 Steering gear pitman arm
10 Tie rod end on steering gear pitman arm
11 Tie rod end on steering gear pitman arm
12 Middle tie rod
13 Tie rod end on intermediate lever
View of left side
7 Tie rod end on steering knuckle arm
8 Left hand tie rod
9 Steering gear pitman arm
10 Tie rod end on steering gear pitman arm
11 Tie rod end on steering gear pitman arm
14 Left hand steering knuckle arm
| Remove/Install | ||
1 | Jack up and support vehicle | ||
2 | Unscrew and press out the tie rod ends (3, 4) on the right hand tie rod (5) from the right hand steering knuckle arm (2) and from the intermediate lever (6) | ||
Press off, refit tie rod on knuckle arm | |||
| |||
| |||
3 | Remove right hand tie rod (5) | ||
4 | Unscrew and press out the tie rod ends (10, 7) on the left hand tie rod (8) from the steering gear pitman arm (9) and from the left steering knuckle arm (14) | ||
Press off, refit tie rod on knuckle arm | |||
| |||
| |||
5 | Remove left hand tie rod (8) | ||
6 | Unscrew and press out the tie rod ends (11, 13) of the middle tie rod (12) from steering gear pitman arm (9) and intermediate lever (6) | ||
Press off, refit tie rod on knuckle arm | |||
| |||
| |||
7 | Remove the middle tie rod (12) | ||
8 | Install in the reverse order | Renew the split pin in the castellated nuts (1). | |
9 | Checking front axle alignment |
Tie rod
Number | Designation | Model | |
BA46.40-N-1002-01F | Castellated nut, tie rod to lever | Nm | 265 |
Puller
625 589 00 35 00
Referenced documents
- ar0060t1000b Jacking up and supporting vehicle
- ar4020t0100b Checking front axle alignment
- ar4640t020001b Press off, refit track rod on track arm