AR46.40-T-0200B | Remove/install track rod | 13.1.00 |
Steering 765.860 in MODELS 613.355 /358 /388 /455 /485
Steering 766.376 in MODEL 613.358 /388
T46.40-0036-01
5 Right hand track rod
6 Right hand idler arm
7 Left hand idler arm
8 Left hand track rod
9 Left track lever
10 Central track rod
| Remove/Install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer. | |
1 | Lift/jack up vehicle | ||
2 | Pry the outer tie rod end of the left tie rod (8) off the left track lever (9) | Installation: Use new locking cotter pin. | |
3 | Pry the inner tie rod end of the left tie rod (8) off the left intermediate lever (7) | Installation: Use new locking cotter pin. | |
4 | Remove left tie rod (8) | ||
5 | Pry outer tie rod end of tie rod (5) off the right-hand track lever | Installation: Use new locking cotter pin. | |
6 | Pry inner tie rod end of the tie rod (5) off the right-hand intermediate lever (6) | Installation: Use new locking cotter pin. | |
7 | Remove right tie rod (5) | ||
8 | Pry right tie rod end of center tie rod (10) off the right-hand intermediate lever (6) | Installation: Use new locking cotter pin. | |
9 | Pry left tie rod end of center tie rod (10) off the left-hand intermediate lever (7) | Installation: Use new locking cotter pin. | |
10 | Remove center tie rod (10) | ||
11 | Install in the reverse order | ||
12 | Checking front axle alignment |
Referenced documents
- ar0060t1000b Jacking up and supporting vehicle
- ar4020t0100b Checking front axle alignment
- ar4640t020001b Press off, refit track rod on track arm
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.