Remove/install track rod

AR46.40-S-0200E

Remove/install track rod

22.01.2020

Model

447, 448

Modification notes

22.01.2020

Information added.

Operation step 1

1

Tie rod

2

Drag link

3

Nut

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Warning

Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid.

Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

Notes on repair work on suspension components

AH00.00-P-0100-01A

 

Remove/install

1

Remove boot of tie rod (1).

AR46.40-S-7200E

 Perform wheel alignment only after completing repair.

2

Remove nut (3) from drag link (2).

 Tie rod to steering

*BA46.40-N-1004-06N

 Open end wrench

*201589000100



Check

3

Check tie rod (1) for wear and damage.

If tie rod (1) is worn or damaged:



Replace tie rod (1).

4

Install in the reverse order.

 Steering linkage

Number

Designation

Model 447, 448

BA46.40-N-1004-06N

Tie rod to steering

Nm

105