Remove/install steering idler arm, replacing plain rubber mount

AR46.40-P-0300A

Remove/install steering idler arm, replacing plain rubber mount

 

Remove, Install

 Installation

Replace self-locking nuts

1

Detach tie rod (10) at steering idler arm (26)

AR46.40-P-0200A

2

Detach drag link (11) at steering idler arm (26)



AR46.40-P-0100A

3

Remove heat shield (26g)

4

Unscrew nut (26b), remove washer (26e). Pull out bolt (26a) and remove steering idler arm (26)



*BA46.40-P-1001-05A

5

Lift sealing lip at the slide bushing (26f) using a screwdriver and remove slide bushing from rubber mount

6

Use extractor (061) to pull out rubber friction bearing (26f)

 Extractor

*129589003300

Installation: Use insertion tool to pull in rubber friction bearing as far as the stop

 Insertion tool

*115589086100

7

Install in the reverse order

Number

Designation

Model 129

BA46.40-P-1001-05A

Self-locking nut, steering idler arm to longitudinal frame member bearing bracket

NM

180