ar4640l020001a

Pressing off track rod at drop arm, fitting on

Type ar · topic 46.40 · version 0101 · 2011-09-13

Applies to: STEERING 765.841 in MODEL 670 with FRONT AXLE 730.353 /354

Where it sits

Function group 2 Chassis › 46 Steering › 46.40 Steering linkage — Series 670

EinPAS 22 Steering › 22.15 Power steering › 22.15.43 Steering arm/drag link/tie rod/damper — Series 670

Also applies to engines/gearboxes: 730 353, 730 354, 765 841

AR46.40-L-0200-01A

Pressing off track rod at drop arm, fitting on

Tie rod

Number

Designation

Steering 765.841 in model 670 with front axles 730.353/354

BA46.40-N-1002-01A

Nut of tie rod to tie rod arm

Nm

205

BA46.40-N-1003-01A

Nut, clamp to tie rod

–

Nm

–

M10

Nm

60

M121.5

Nm

85

Pressing off track rod at drop arm, fitting on

Puller

601 589 04 33 00

Pressing off track rod at drop arm, fitting on

N46.40-0276-01

Detaching

1 Remove cotter pin from castle nut on steering knuckle arm.

Replace cotter pin.

2 Unscrew castle nut.

3 Press drag link off steering knuckle arm using a puller.

Do not damage rubber cap.

Attaching

4 Secure drag link on the steering knuckle arm.

5 Screw on castle nut.

Observe tightening torque.

6 Fix castle nut with new cotter pin.

To fix, do not loosen castle nut. Check whether the ball ends are centered (ball pin to ball socket). If not, loosen clamp on drag link and correct the position of the ball ends.

Observe tightening torque of clamp.