ar4640d020001b

Press off, refit track rod on track arm

Type ar · topic 46.40 · version 0103 · 2011-09-13

Applies to: STEERING 765.841 in MODEL 667 with FRONT AXLE 730.412

Where it sits

Function group 2 Chassis › 46 Steering › 46.40 Steering linkage — Series 667

EinPAS 22 Steering › 22.15 Power steering › 22.15.43 Steering arm/drag link/tie rod/damper — Series 667

Also applies to engines/gearboxes: 730 412, 765 841

AR46.40-D-0200-01B

Press off, refit track rod on track arm

Tie rod

Number

Designation

Steering 765.841 in model 667
with front axle 730.412

BA46.40-N-1001-01A

Tie rod nut to steering knuckle

Nm

95

BA46.40-N-1003-01A

Nut, hose clamp to tie rod

–

Nm

50

M10

Nm

-

M121.5

Nm

-

Press off, refit track rod on track arm

601 589 04 33 00

Puller

Press off, refit track rod on track arm

D33.25-0226-01

Removal

1 Uncotter castle nut (2) on track lever (3).

Replace cotter pin (1).

2 Remove castle nut (2).

Press off, refit track rod on track arm

D33.25-0227-01

Pushing off

3 At the left and right remove tie rod (4) using puller (5) from track lever (3).

Do not damage rubber cap.

Press off, refit track rod on track arm

D33.25-0237-01

Attaching

4 Hook tie rod (4) onto track lever (3).

5 Screw on castle nut (2).

Pay attention to tightening torque.

6 Secure castle nut (2) with new cotter pin (1).

Do not detach from castle nut (2) secured with cotter pin. Check whether the ball heads are centered correctly (ball stud to ball socket). If this is not the case, detach clamp (6) from tie rod (4) and correct position of ball heads.
Observe tightening torque for clamp (6).