1 | Rotating Plate |
2 | Measurement Rule |
3 | Steering rod I (1st front axle) |
4 | Steering rod II (2nd front axle) |
B46.40-0023-06
| Check | ||
1 | Check the mechanical steering conditions | ||
2 | Check, adjust the centralization of steering in the steering gear housing | ||
Adjust | |||
3 | Move the vehicle a few meters in a straight line forward and backward | ||
4 | Lift the vehicle by the front axles | Due to safety measures, block the front axles with brackets. | |
5 | Place the wheel of both front axles on rotating plates (1) | ||
6 | Check and adjust the steering bars (3, 4) and the spherical terminals of the two front axles | ||
7 | With a measurement ruler (2) check the straight position of both left wheels of 1st and 2nd front axle | The measuring ruler (2) must be supported in the flanks of the two tires (arrows). Repeat the checking in the right side. | |
8 | Through the change in the steering bars length (3, 4), place the wheels of the two front axles in a straight position forward | With the measurement ruler (2) check the straight position of both front left wheels. | |
Type 958.184/186Lock nut of track rod ball joints | |||
9 | Regulate rotating plates (1) in all wheels | Loosen the screws on the angle scales of the turntables (1). Displace the scales up to the respective point of 0° (arrow) match with the central trace of the scale. | |
10 | Check the curve angle of 1st and 2nd front axle |
| |
11 | Adjust the curve angle of 1st and 2nd front axle |
| |
12 | Lift the vehicle in front axles and remove the support racks and rotating plates (1) below the front wheels | ||
13 | Perform a tread test with the vehicle | Check the general behavior of vehicle steering. |
Referenced documents
- ar4620b3015d Check and adjust center steering position on steering gear
- ar4640b050001xb Checking steering angle of 1st and 2nd front axle
- ar4640b050002xb Checking steering angle of 1st and 2nd front axle