1 | Intermediate lever holder Ⅱ |
2 | Sealing ring |
3 | Sealing ring |
4 | Inner taper roller bearing |
5 | Intermediate lever Ⅱ |
6 | Outer taper roller bearing |
7 | Pressure washer |
8 | Castle nut |
9 | Threaded wheel cap |
B46.00-0053-06
2 | Sealing ring |
3 | Sealing ring |
4 | Inner taper roller bearing |
6 | Outer taper roller bearing |
7 | Pressure washer |
8 | Castle nut |
9 | Threaded wheel cap |
10 | Intermediate lever holder Ⅰ |
11 | Intermediate lever Ⅰ |
B46.00-0052-06
| Disassemble | ||
1 | Remove the threaded wheel cap (9), from intermediate lever Ⅱ (5) | ||
2 | Remove the castle nut (8) and the pressure washer (7), from intermediate lever Ⅱ (5) | ||
3 | Remove the tapered roller bearing (6) from the intermediate lever Ⅱ (5) | ||
4 | Remove the intermediate lever Ⅱ (5) from the intermediate lever holder Ⅱ (1) | For removal, hit the intermediate lever with a plastic hammer. | |
5 | Remove the sealing rings (2, 3) from the intermediate lever Ⅱ (5) | ||
6 | Remove the inner tapered roller bearing (4) from the intermediate lever Ⅱ (5) | ||
| Disassemble | ||
7 | Remove the threaded wheel cap (9), from intermediate lever Ⅰ (11) | ||
8 | Remove the castle nut (8) and the pressure washer (7), from intermediate lever Ⅰ (11) | ||
9 | Remove the outer tapered roller bearing (6) from the intermediate lever Ⅰ (11) | ||
10 | Remove the intermediate lever Ⅰ (11) from the intermediate lever holder Ⅰ (10) | For removal, hit the intermediate lever with a plastic hammer. | |
11 | Remove the sealing rings (2, 3) from the intermediate lever Ⅰ (11) | ||
12 | Remove the inner tapered roller bearing (4) from the intermediate lever Ⅰ (11) | ||
| Check | ||
13 | Inspect the tapered roller bearings for wear | If necessary: | |
| |||
Replace the bearings. | |||
Remove the outer races of tapered roller bearings (4, 6) with the aid of hammer and bronze billet. | |||
| Assemble | ||
14 | Install the inner tapered roller bearing (4) on the intermediate lever Ⅱ (5) | Lubricate the bearing and fill the cavity of the intermediate lever Ⅱ (5) with grease. | |
Grease, DB supply specification 6804 - Class 267.0 | |||
15 | Install the sealing rings (2, 3) of the intermediate lever Ⅱ (5) | A sealing agent should be applied between the outer surface of the rings and the inside of its housing on the intermediate lever Ⅱ (5). | |
Replace the sealing rings (2, 3). | |||
16 | Install the intermediate lever Ⅱ (5) in the intermediate lever holder Ⅱ (1) | ||
17 | Install the outer tapered roller bearing (6) and the pressure washer (7), of the intermediate lever Ⅱ (5) | Lubricate the bearing with grease | |
Grease, DB supply specification 6804 - Class 267.0 | |||
18 | Install the castle nut (8), of the intermediate lever Ⅱ (5) | Castle nut of intermediate lever | |
Grease, DB supply specification 6804 - Class 267.0 | |||
19 | Install the threaded wheel cap (9), in the intermediate lever Ⅱ (5) | Intermediate lever cap/hub cab | |
| Assemble | ||
20 | Install the inner tapered roller bearing (4) on the intermediate lever Ⅰ (11) | Lubricate the bearing and fill the cavity of the intermediate lever Ⅰ (11) with grease. | |
Grease, DB supply specification 6804 - Class 267.0 | |||
21 | Install the sealing rings (2, 3) of the intermediate lever Ⅰ (11) | A sealing agent should be applied between the outer surface of the rings and the inside of its housing on the intermediate lever Ⅰ (11). | |
Replace the damaged rings. | |||
22 | Install the intermediate lever Ⅰ (11) in the intermediate lever holder Ⅰ (10) | ||
23 | Install the outer tapered roller bearing (6) and the pressure washer (7), of the intermediate lever Ⅰ (11) | Lubricate the bearing with grease | |
Grease, DB supply specification 6804 - Class 267.0 | |||
24 | Install the castle nut (8), of the intermediate lever Ⅰ (11) | Castle nut of intermediate lever | |
Grease, DB supply specification 6804 - Class 267.0 | |||
25 | Install the threaded wheel cap (9), in the intermediate lever Ⅰ (11) | Intermediate lever cap/hub cab |