ar4635p0600sr

Remove/install electric rack-and-pinion steering

Type ar · topic 46.35 · version 0201 · 2019-02-14

Applies to: Model 453

Where it sits

Function group 2 Chassis › 46 Steering › 46.35 Electrical steering — Series 453

EinPAS 22 Steering › 22.15 Power steering › 22.15.42 Steering gear/steering shaft — Series 453

AR46.35-P-0600SR

Remove/install electric rack-and-pinion steering

12.02.2019

Model

453

Modification notes

26.10.2017

Initial startup of electric steering control unit and reset of learned value, added.

Step 6

Remove/install electric rack-and-pinion steering

1

Electric rack-and-pinion steering

2

Tie rod ends

3

Bolts

P46.35-2117-12

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Evaluating steering gear when repairing accident vehicles

AH46.20-P-9409-01A

Remove/install

1

Pry off left and right tie rod ends (2) from steering knuckle

AR46.40-P-0210SR

2

Lower front axle

AR33.10-P-0003SR

3

Remove bolts (3)

Installation: Replace bolts (3).

Bolt, electric rack-and-pinion steering to front axle carrier

*BA46.20-P-1001-01R

4

Remove electric rack-and-pinion steering (1) together with an assistant

5

Install in the reverse order

6

Conduct initial startup of electric steering control unit then reset the learned value for the electric steering in the Electronic Stability Program (ESP) control unit

When replacing the rack-and-pinion steering (1).

AD00.00-P-2000-06SR

Conduct initial startup in menu item "Adaptations".

7

Read out fault memory with diagnostic device and delete, if necessary

AD00.00-P-2000-06SR

Steering gear

Number

Designation

Model 453

BA46.20-P-1001-01R

Bolt, electric rack-and-pinion steering to front axle carrier

Nm

105

Referenced documents