B01.00-0008-01
Starter actuation in the motor compartment, only in vehicles with motor 904.9
S10 Motor Starter Switch
S11 Motor Stop Switch
B46.00-0024-01
1 Tank Cover
a Maximum Level
b Minimum Level
Bleed | |||
1 | Lift the vehicle by the front axle | Ensure that the parking brake is driven and that rear wheels are paved. | |
Danger! | Risk of accident due to unintentional movement with the engine running. Risk of injury due to crushing and burning in contact during the starting procedure or with motor while running | Assure vehicle against unintentional movement. Wear tight fitting and closed work clothes. Do not touch hot or moving parts. | |
2 | Start the motor and leave it running in neutral | In vehicles with motor 904.9, actuate the starter by pressing the starter switch (S10) located in the motor. | |
3 | Remove the tank cover (1) and check the fluid level in the cover level gauge | If necessary, complete the tank with the prescribed fluid. During the bleeding process the hydraulic fluid level hall not remain below the minimum level mark (b). Otherwise, the air is again sucked to the steering system. | |
4 | Bleed the hydraulic steering system | Rotate the steering wheel turning the wheels against the left stop and keep it within hydraulic limit for about 5 seconds. The system air will be automatically eliminated. | |
Keep the engine running until the air bubbles in hydraulic fluid tank are removed. | |||
5 | Check again the fluid level in the tank | If it is necessary, fill in the tank with the prescribed fluid and place the cover in the tank. | |
6 | Turn the engine off | In vehicles with engine 904.9, turn off the engine by pressing the switch (S11) on the engine. | |
7 | Turn the front axle of vehicle down |
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1027-06A | Lubricant oil for hydraulic steering case, class 236.2, DBL 6623.60 | - |
Referenced documents
- as0000b000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.