ar4620i0500a

Removing and installing steering gear

Type ar · topic 46.20 · version 0101 · 2000-02-21

Applies to: MODEL 684 with STEERING 762.350

Where it sits

Function group 2 Chassis › 46 Steering › 46.20 Steering gear — Series 684

EinPAS 22 Steering › 22.15 Power steering › 22.15.42 Steering gear/steering shaft — Series 684

Also applies to engines/gearboxes: 762 350

AR46.20-I-0500A

Removing and installing steering gear

29.10.99

MODEL 684 with STEERING 762.350

Removing and installing steering gear

N46.20-2018-02

1 Steering gear

2 Steering shaft

3 Universal joint

4 Pitman arm

5 Drag link

6 Steering gear holder

Removing and installing

Danger!

Risk of injury by trapping and crushing when tilting the driver’s cabin

No person must be in the driver’s cabin when it is tilted. Always tilt the driver’s cabin until it reaches its limit position and support it using a safety support.

AS60.80-Z-0001-01A

1

Tilt driver’s cabin

2

Remove steering shaft (2) from universal joint (3) on steering gear (1)

3

Unscrew universal joint (3) from steering gear (1)

Make position of steering shaft beforehand!

4

Pull drag link from Pitman arm (4)

AR46.40-I-0100-01A

Extractor

*601589043300

Installation:

Do not attach drag link until PAS pump has been filled and bled and center position of steering gear has been checked:

Check and adjust center position of steering gear

AR46.20-I-3015A

5

Remove steering gear (1) from underbody

Screw, steering to underbody

*BA46.20-N-1005-01E

6

Remove Pitman arm (4) from steering gear (1) steering shaft

Installation:

- Markings on steering shaft and Pitman arm must correspond.

- Replace retaining ring.

Nut, Pitman arm to steering gear

*BA46.20-N-1002-01E

7

Install in reverse order

Steering gear

Number

Designation

Steering 762.350

BA46.20-N-1002-01E

Nut, Pitman arm to steering gear

Nm

270

BA46.20-N-1005-01E

Screw, steering to undercarriage

Nm

140

Removing and installing steering gear

Extractor

601 589 04 33 00

Referenced documents