ar4610w0300a

Remove/install steering angle sensor

Type ar · topic 46.10 · version 0103 · 2008-04-29

Applies to: MODEL 957.65 with CODE (AN8) Hydraulically steered leading axle On front axle MODEL 957.66 with CODE (AN9) Hydraulically steered trailing axle On front axle

Where it sits

Function group 2 Chassis › 46 Steering › 46.10 Steering wheel, jacket tube, steering shaft, steering lock — Series 957 (models 65*, 66*)

EinPAS 22 Steering › 22.15 Power steering › 22.15.12 Sensor/switch/wiring harness — Series 957 (models 65*, 66*)

EinPAS 26 Active safety system › 26.20 Braking/traction control › 26.20.12 Sensor/switch/wiring harness — Series 957 (models 65*, 66*)

AR46.10-W-0300A

Remove/install steering angle sensor

21.4.08

MODEL 957.65 with CODE (AN8) Hydraulically steered leading axle
On front axle

MODEL 957.66 with CODE (AN9) Hydraulically steered trailing axle
On front axle

Remove/install steering angle sensor

W46.80-1023-06

1 Linkage rod

2 Plug connection

B86 Steering angle sensor (front axle)

Remove/install

1

Switch drive switch to position "OFF"

2

Detach linkage (1) from steering angle sensor (B86)

*BA46.80-N-1024-01B

3

Disconnect connector (2) from steering angle sensor (B86)

4

Disconnect steering angle sensor (B86) from bracket

*BA46.80-N-1022-01B

5

Install in the reverse order

6

Teach in auxiliary steering axle system (ZL)

AR46.80-W-1100A

Auxiliary steering axle (ZL)

Number

Designation

Model 957
with code AN8, AN9

BA46.80-N-1022-01B

Bolt, steering angle sensor to bracket

Nm

5

BA46.80-N-1024-01B

Nut, steering angle sensor linkage

Nm

8

Referenced documents